Ding Repair 101 | Why a Proper Glassing Rack Makes the Job Easier
Share
If you've ever tried to glass or repair a board balanced across two milk crates, a couple of sawhorses, or whatever happened to be lying around the shed, you already know how that goes: the board shifts the second you lean on it, your resin's kicking off while you're still repositioning things, and one wrong knock undoes ten minutes of careful sanding.
A glassing rack fixes exactly that problem, and it's worth understanding why before you write it off as an unnecessary extra.
Why stability matters so much here
You can get away with a bit of movement while you're shaping. Not so much once there's wet resin involved. At that point you want both hands free and a base that genuinely isn't going anywhere, because any wobble can nudge a lamination out of true or smear a patch you've just laid down.
Our Glassing Rack is built around that one requirement. The base is 5mm solid steel, fully welded, and bolts straight to the floor through pre-drilled holes. Once it's down, it's down, and you've got a completely stable working surface for however long the job takes, whether that's a quick ding repair or a full glass job.
Height you can actually adjust mid-job
Repair and glassing work isn't one position start to finish. You're bent over checking a patch, then standing to sight down the rail, then leaning in close under work lights checking for pinholes. The rack adjusts from 860mm to 1060mm via a simple index plunger, so you reset the height in seconds instead of working hunched over or up on your toes for an hour.
The support rods are wrapped in heavy-duty foam, so the board sits protected while you work, with no pressure dents or scuffed rails from a bare steel edge.
A finish that can handle the mess
Everything's fully powder coated in matte black, which matters more here than on a shaping rack — glassing work means resin drips, acetone and sanding dust, and a raw or painted finish won't hold up the same way. It's backed by a year's warranty, made right here in Australia, and takes about 10–20 minutes to bolt together and set up.
Who actually needs one
If you're doing the occasional ding repair at home, you can get away without one for a while. But the moment repairs become regular, you're running a repair business, or you're moving into full lamination work, a rack stops being a nice-to-have and starts paying for itself — in boards you didn't ruin and jobs that took half the time.
Got a repair or glassing setup you're not sure about? Get in touch — we're happy to talk it through.